In order to access this site you must accept the use of cookies. Please read the privacy policy for more details. Privacy policy
Share on:

2010

(16) A new algorithm for the "rest milling" has been introduced. Up to now it works only when some surfaces are selected and when the optimizations of XY steps are disabled. This new algorithm generates a smoother toolpath, while calculation times are greatly reduced.

(15) It has been added a new machinings’ management for disc tool roughing dedicated to marble sector.
For this kind of work, it has been created a new window of parameters configuration.
This window will be active by input the option <QD> in the machining name. For example: roughing <QD> The window is shown in sequence after the standard ones, normally used in these machinings. With these parameters is possible to manage disc roughing by cycle, by zone, by faces or quadrants, just managing the machinings of the rest material and optimizing approaches and retractions.

(14) New update in the "AMM" module (ver. 0910).
In this version it has been improved the machining of "Curves" and "Swarf machining".
Now the library includes the multicore version too, which allows to speed up all the calculations.
The news in this release are:
a) introduced a new kind of link: "Step". It is very useful especially when machining mesh surfaces.
b) the speed and quality of the Swarf machining have been improved.
c) In the stock management it has been introduced the definition of stock with undercuts.
d) In the kinematics’ simulation it has been added the calculation of machining time, the visualization of the coordinates of the collision points and the grouping by cycles in the collisions' report.

(13) A new command has been introduced in the Collision check of tool components.
In addition to the choices: "Collision toolpath deletion" and "Z shifting of collision toolpath", you can now find the new option "Tool axis tilting where needed". This choice can be applied when using "spherical" tools to obtain the automatic tilt of fourth and fifth axes to move the tool's shaft away from the object, maintaining the contact between the tool and the working surface. This option doesn't require any further parameter and can be applied to any machining. This important innovation allows the 5 axes continuous machining also on external parts of the model, for instance by "Contouring" or "3D profile pocketing" and also while performing roughing or undercut machinings.
With the addition of this powerful automatism, this product becomes a unique system with top-level performance and effectiveness, either on 4 or 5 axes machines. The high speed 5 axes machines will finally express their dynamic performances at the best, becoming the indispensable and ideal partner, having their strength in the velocity and precision of 5 axes continuous machining.

(12) New update of the "AMM" module (ver. 0610).
In this release have been added two new kind of machining. Start the strategies' window, in the field "Calculation based on" you will find the possibility to choose the surfaces and beside that, the following machinings:
a) Wireframe, tipically a 5 axes finishing machining, which uses additional lines for the tool orientation to set the desired slope in each area.
b) Swarf machining, in this case the side of the tool is placed between two drive curves. In this case it is possible to set or not some drive surfaces to calculate the tool's orientation. The calculation of the passes between the two drive curves can be performed with different optimization' s options. This machining includes the roughing management too.

(11) Now available the new release to import the following CAD files: Catia V4, Catia V5, NX (Unigraphics), PRO/E, Inventor, Solid Works and Step. It has been improved the management of the new 64bit’s platform of these CAD and the assembly’s new management.

(10) A new version of the "AMM" module has been released (ver. 0610).
Here you find some news concerning this last version:
a) The procedures and the quality of results have been greatly enhanced in the machining of STL geometries with simple driving surfaces.
b) The kinematic simulation module has been improved in terms of speed and quality of results.

(9) In the curves' machining there is now thenew chance to perform more passes approaching the selected curves. The system requires the number of parallel passes and the incremet between them. This is an active option also in 5 axes machining of curves.

(8) It has been introduced the multicore processors management during some procedures of machining calculation. More updates will follow, to reach the full employ of multiprocessors used with the new computers. These updates allows to speed up the calculation times.

(7) The new version of the "AMM" module has been released (ver. 0310).
In this version the multicore processors management has been improved to speed up the tool-paths' calculation Also the kinematic simulator has been improved.

(6) Update the importing tools for Catia V4, Catia V5, Unigraphics, PRO/E, Inventor, SolidWorks and Step native files for 2010 CAD Version.

(5) It's now available a new version of the AMM optional module (ver. 1209).
Main improvements of this release are:

a) Management of multi-core processors to speed up the tool-paths calculation.
b) Change of some pictures for a better understanding of some commands.
c) Possibility to obtain the rounding of rough edges by checking the box named "slow and safe path creation". This command is in the "Surface paths" window, "Surface quality" section -> "Advanced".
d) Possibility to manage the links in spiral machining with the dedicated command "Advanced". This command is in the "Surface paths" window, "Cutting method", "Spiral" -> "Advanced".
e) New setting in the 5 axes "Tool axis control" > "Be tilted relative to impeller machining layer".
This new technique allows to set the tool rotation with more accuracy and according to the kind of object.
f) In the "Gauge check" managing window have been added/improved some behaviour strategy and parameters.
g) In the "Link" managing window some new possibilities have been added: > start and return from/to home position, settable by clicking on the button "Distances" > in the "Last exit" parameter has been added the possibility to retract to clearance area trough tube centre.
> in the "Clearance area" box has been added the "link smoothing radius" option.
> in the "Clearance area" box has been added the "keep initial orientation until distance" option.
> in the "Default lead-in/out" box there's a new field to manage the feed-rate percentage to apply.
h) In the "Roughing" management window some new possibilities have been added:
> some parameters to configure the rough by deleting or not small parts of the tool-path.
> optimized the commands in the "Area Roughing" window.
i) In the "Utility" window there are some new parameters to manage the axial shifting in a better way....
l) Empowered the kinematic simulation's features, now more fast and accurate. In this release the simulation can manage the material's removal starting from the rough.

(4) Update the "SolidWorks 2010 --> SUM3D" (option) exporter tool.

(3) Update the Parasolid importing tool.

(2) Update the "Rhinoceros .3DM version 4.0 SR7" importing tool.

(1) Update the importing tools for Catia V4, Catia V5, Unigraphics, PRO/E, Inventor, SolidWorks and Step native files.

© CIMSYSTEM VAT IT02833910967Terms and Conditions Privacy Policy
RESERVED AREA Reserved Area FTP Area