logo-cim

RhinoNC

CAM software solution integrated into Rhinoceros

Release Notes

2020

06/01/2020
(19) RhinoNC is available with 2 new languages: Chinese and Korean.

06/01/2020
(18) New option in curve contouring strategy: it is possible to insert an angle between the steps on the deep.

06/01/2020
(17) New collision check in curve contouring strategy: it is possible to check all kind of approach.

06/01/2020
(16) New option in drilling strategy: is possible to select the movement between the deep step with rapid or work feed.

06/01/2020
(15) New rapid movement in drilling cycles; you can select if the rapid movement between 2 holes change in only one position or in different points

06/01/2020
(14) New automatic recognition of diameter in drilling strategy. Now is possible to recognize also in a mesh geometry.

01/01/2020
(13) New workplanes management. New dialog with the possibility to creation multiple Workplanes unchain to Rhinoceros workplanes.

01/01/2020
(12) New configuration windows. New management of layout and strategies configuration dialog.

01/01/2019
(11) New Archives. New management of materials, strategies and tools archives.

01/01/2019
(10) New workplane orientation. New wizard management with possibility to handle different kinds of workplane orientation.

01/01/2019
(9) Automatic drilling. Possibility to manage the drilling cycles with automatic recognition of geometry.

01/01/2019
(8) Manual drilling. New strategy to define a drilling setup.

01/01/2019
(7) New Wizard windows. New wizard windows to guide the making of all CAM strategies.

01/01/2019
(6) New rest material simulation. Possibility to manage the toolpath step by step in rest material simulation and to show/hide the tool.

01/01/2019
(5) New wireframe simulation. Possibility to manage the toolpath step by step in wireframe simulation and to show/hide the tool.

01/01/2019
(4) New configuration bar. Added new bar with the command to manage the archives, work rules, configuration and documentation files.

01/01/2019
(3) New machining tree. New structure to insert , manage and show the strategies with possibility to change the machining parameters.

01/01/2019
(2) New machining bar. Added new bar with command to create, simulate, post processing and reporting the strategies. Possibility to manage also the list of strategies.

01/01/2019
(1) New ghaphics interface. New structure to menage all CAM strategies.

Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.
Sorry, no content found.